Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
CP-2915E
Specification:5GAL、55GAL
Scope of application:
Introduction:
CP-2915E
PRODUCT DESCRIPTION
CP-2915E is an ISO 15 synthetic polyol ester (POE) lubricant formulated for performance in refrigeration compressors using HFC, CFC or HCFC refrigerants.
CP-2915E is chemically and thermally stable for cleaner operating performance, provides wear protection for steel or aluminum surfaces for longer system life and system efficiency, and is compatible with HFC, as well as CFC and HCFC refrigerants*.
Typical dielectric breakdown voltage 40 K-Volts at 25℃(ASTM D-1816) and resistivity (ASTM D-1169) of 45x1012 ohm-cm.
APPLICATIONS
For use as initial fill or service fill lubricant in reciprocating and scroll compressors in hermetic or semi-hermetic systems.
For use in retrofitting systems from: R-12, R-22 or R-502 to R-134a, R-404A, R-407C or R-410A.
Miscible over the required broad temperature ranges found in appliance or commercial/industrial systems. -
TYPICAL PROPERTIES** |
CP-2915E |
ASTM Method |
Viscosity @ 40℃ ,cSt |
15.0 |
D445 |
Viscosity @ 100℃, cSt |
3.2 |
D445 |
Specific Gravity, @15.6℃/15.6℃ |
0.94 |
D1298 |
Water Content, ppm |
<60 |
D1533B |
Pour Point (℃) |
-50 |
D97 |
Flash Point, C.O.C., (℃) |
196 |
D92 |
Acid Number, Mg. KOH/g |
<0.05 |
D974 |
Miscibility (20% lubricant with R-134A) |
-40°C |
|
*Note: Polyol ester lubricants are NOT recommended for use with ammonia.
**These values are not intended for use in preparing specifications.