Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
CP-412-100
Specification：5GAL、55GAL
Scope of application：
Introduction：
CP-412-100
PRODUCT DESCRIPTION
CP-412-100 is a custom blended synthetic fluid designed for use in ammonia refrigeration systems. These lubricants offer improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils.
CP-412-100 is soluble with ammonia, enhancing heat transfer in the evaporator. This solubility also improves oil return characteristics, especially in DX type evaporators. Optimum efficiency will occur at evaporator temperatures of over 10℉. -
TYPICAL PROPERTIES |
CP-412-100 |
|
Viscosity @ 77℉ |
236 |
|
Viscosity @ 100℉ |
110 |
|
Viscosity @ 210℉ |
12 |
|
Viscosity Index |
106 |
|
Specific Gravity 25℃ |
0.989 |
|
Pour Point℃ |
-32 |
|
Density, lbs./gal |
8.25 |
|
Flash Point, ℉ (℃) |
456(236) |
|
Four-Ball EP |
|
|
Weld Load |
126 Kg |
|
Non-Seizure Load |
50 Kg |
|
Load Wear Index |
29.3 |
|
Four-Ball Wear |
|
|
ASTM D-2288 40 Kg, 1200 RPM |
0.47 mm |
|
Water, Wt, Percent |
0.008 |
|
Ash, ppm |
<4 |
|
Refractive Index, 25℃ |
1.4666 |
|
Thermal Conductivity |
|
|
BTU/hr. ft2(℉/ft) |
|
|
100℉ |
0.093 |
|
200℉ |
0.092 |
|
Spccific Heat, BTU/lb. ℉ |
|
|
100℉ |
0.50 |
|
200℉ |
0.53 |
|
Dielectric Strength |
37.8 kV |
*These values are not intended for use in preparing specifications
