Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
CP-4780-5
Specification：5GAL、55GAL
Scope of application：
Introduction：CP-4780-5 is used in convection and forced-cooled pipe cable systems.
Similar products：
Archine Refritech RAB 5
Click PDF at bottom left of the page to get more product details.
CP-4780-5
PRODUCT DESCRIPTION
CP-4780-5 is used in convection and forced-cooled pipe cable systems. It is also widely used in self-contained cable systems due to its high resistance to gassing under electrical stress. CP-4780-5 is based on synthetic alkyl benzene, which has the following advantages:
- Low power factor - High volume resistivity
-Excellent oxidation stability -Excellent resistance to gassing under -Non-toxic electrical stress
-High dielectric strength -Low weight loss under vacuum
-High water tolerance -No pumping problems
-Compatible with polybutene or mineral oil
-High auto ignition point -
|
TYPICAL PROPERTIES* |
CP-4780-5 |
|
Viscosity @ 40℃,cSt, ASTM D445 |
5.5 |
|
Viscosity @ 100℉ |
5.25 |
|
Flash Point, C.O.C.,℉(℃) ASTM D92 |
275(135) |
|
Pour Point ℉(℃) ASTM D97 |
-58(-50) |
|
Viscosity Index ASTM D2270 |
-33.0 |
|
Density, lb/gal, 60℉ |
7.24 |
|
Specific Gravity, ASTM D1298 |
0.87 |
ELECTRICAL PROPERTIES
Power factor, 60 Hz, 100°C D-924
Initial 0.0005
After heating 96 hrs. 115°C D-1934 (Procedure A) 0.0005
Resistively, ohm-cm, 100°C D-1169, D-257
Initial 1x1015
After heating 96 hrs. 115℃ D-1934 (Procedure A) 5x1014
Dielectric Strength, kV, 25℃ D-877 >35
Dielectric Constant, 60 HZ, 100℃ D-924 2.1
Gassing Under Electrical Stress
Pirelli, Microliters/Minute D-2300 (Procedure B) <-10
*These Values are not intended for use in preparing specifications.
