Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
![](../userfiles/57c7fd009ca84d3fa51f49b87b93723e.jpg)
ArChine Refritech REF 85
Specification:20L、200L
Scope of application:
Introduction:Extremely low volatility provides improved lubricant/gas separation
ArChine Refritech REF 85
Refrigeration Oil for R-22 Rotary Screw Compressors
PRODUCT DESCRIPTION
ArChine Refritech REF 85 is unique custom blend of synthetic Polyolester(POE) with additives for natural lubricity,
excellent thermal and chemical stability with CFC refrigerants.
ADVANTAGES
- Higher working viscosity allows for better seal between rotors
- Excellent thermal and chemical stability
- Good solubility at low temperatures
- Extremely low volatility provides improved lubricant/gas separation
- Better exchanger efficiency
APPLICATIONS
ArChine Refritech REF 85 has good solubility with certain refrigerants such as R-22 to very low temperatures. This product is an excellent choice for applications such as rotary screw compressors.
TYPICAL PROPERTIES*
ArChine Refritech REF 85 |
Standard Specification |
Appearance |
Light yellow clear liquid |
Density, 20℃, g/cm3 |
0.971 |
Kinematic Viscosity@40℃, mm2/s |
86.9 |
Kinematic Viscosity@100℃, mm2/s |
11.13 |
Viscosity Index |
115 |
Flash Point, Open Cup, ℃ |
234 |
Fire Point, ℃ |
256 |
Pour Point, ℃ |
-42 |
Copper Corrosion, 100℃, 3h |
1 |
Foaming, 24℃ |
15/0 |
*These values are not intended for use in preparing specifications.