Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
Archine Hydratek FSH 100
Specification:19L、200L
Scope of application:
Introduction:USDA / NSF H1 Approved
ArChine Hydratek FSH 100
Food Grade Hydraulic Oil
NSF Registration No. 148513 Place of Origin: Shanghai,China
GENERAL:
ArChine Hydratek FSH 100 is specially formulated to provide superior lubrication in food plant machinery. The water white oil provides outstanding
anti-wear protection, which is compounded to prevent rusting in the presence of moisture, non-foaming and has rapid water separation
characteristics. An effective antioxidant gives long oil service life and reduces the possibility of sludge and varnish formation.
ArChine Hydratek FSH 100 should be used where hydraulic fluids and other mild lubricants are called for in equipment associated with food
processing. The oil provides anti-wear protection that meets all the requirements of major hydraulic pump manufacturers. USDA/NSF has
approvedArChine Hydratek FSH 100 under their H-1 specification for incidental contact with food. The oil complies with FDA guidelines
for food contact listed in CFR Title 21 Part 178, Section 178.3570.
FEATURES:
- USDA / NSF H1 Approved
- HALAL Approved
- Excellent Rust Protection
- Superior Oxidation Resistance
- Non-Foaming
- Superior Anti-Wear
Applications:
- Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended
- Hydraulic applications where contamination or leakage are unavoidable
- Where small amounts of water are unavoidable and this water could damage components
- Systems containing gears and bearings where mild anti-wear characteristics are required
- Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist
TYPICAL PROPERTIES*:
ISO Grade |
100 |
Apperance |
Colorless transparent liquid |
Density@ 20℃, g/cm3 |
0.862 |
Viscosity @ 40°C, mm2/s |
98.9 |
Viscosity @ 100°C, mm2/s |
11.61 |
Viscosity Index |
105 |
Pour Point, °C |
270 |
Flash Point, °C(open cup) |
―18 |
Foaming 24℃, 93.5℃, after24℃ |
10/0 20/0 10/0 |
Copper corrosion,100°C/3hr,grade |
1b |
*Typical data shall not be used as product specifications.