Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
![](../userfiles/03dde1612eea447b9aadd58167585c5c.jpg)
ArChine Refritech NNR 10
Specification:20L、200L
Scope of application:
Introduction:Similar to lubricant oils for all types of industrial equipment requiring oils with very low freezing points
ArChine Refritech NNR 10
Naphthenic Oil for Freezer Compressors
Description
Group of naphthenic oils for freezer compressors which use freon, ammoniac or carbon dioxide. They also possess excellent lubrication properties when used on industrial equipment.
Recommended uses
Similar to lubricant oils for all types of industrial equipment requiring oils with very low pour points. Basically compressors of freezing equipment which use freon, ammoniac or CO2.
Qualities
Similar to lubricant oils for all types of industrial equipment requiring oils with very low freezing points.
Has a naturally low freezing point, without any additives.
High oxidation resistance thanks to its natural suppressant content.
High chemical stability.
Minimum carbon formation.
Low flocculation point.
Quality level
DIN 51503 KC
ISO 6743-3B-DRA
Technical characteristics
Items |
Unit |
Value |
Appearance |
/ |
Light yellow transparent liquid |
Density at 20℃ |
g/cm3 |
0.882 |
Viscosity at 40℃ |
cSt |
9.80 |
Viscosity at 100℃ |
cSt |
2.31 |
Viscosity Index |
|
13 |
Flash point, open cup |
℃ |
142 |
Fire point |
℃ |
156 |
Pour point |
℃ |
-54 |
Copper Corrosion, 3h, 100℃ |
/ |
1 |
Available in
185 Kg. Drums
Hazard identification
These products are not classified as toxic or hazardous according to current legislation.
Handling
Minimum safety precautions should be taken when using these products to avoid prolonged contact with the skin and in accordance with good industrial hygiene practices. The use of gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks
Inhalation: As this product has low volatility, the risk of inhalation is minimal. Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water. Eyes: Wash thoroughly with water. General measures: Get medical help.
Fire-fighting measures
No special measures required. Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements.