Products
- Superlube
- Momentive
- Momentive
- Food grade vacuum pump oil
- Food grade chain oil
- Refrigeration lubricants
- Food grade refrigeration oil
- R290 Refrigeration Lubricants
- Alkyl benzene frozen oil
- BVA Air Compressor oil
- BVA Hydrocarbon Compressor oil
- BVA Alkyl Series
- BVA RPOE C
- BVA Food Grade Gear Oil
- BVA Food Grade Synthetic Hydraulic Oi
- High temperature chain lubricants
- Hydrocarbon gas compressor lubricants
- Food grade compressor oil
- Food grade gear oil
- Food grade hydraulic oil
- Food grade white oil
- Food grade grease
- Food-grade lubricants
- Synthetic gear lubricants
- Food grade heat conduction oil
- Air compressor lubricants
- Synthetic compressor lubricants
ArChine Comptek FPC 150
Specification：19L、200L
Scope of application：
Introduction：Multistage units with a history of excessive oil degradation from mineral oil-based products
ArChine Comptek FPC 150
Food Grade Synthetic PAO Compressor Oil
GENERAL:
ArChine Comptek FPC 150 is custom-blended with synthetic base fluids and special additives to provide excellent protection against
wear and outstanding cold-temperature fluidity. They offer excellent performance in a wide range of temperatures including sub-zero temperatures.
They also offer excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect components. In addition,
they resist fling-off and is designed to remain on the chain for maximum lubrication and protection.
ArChine Comptek FPC 150 is long life lubricant and recommended for use in screw compressors, evaporators and spiral freezers operating
at extremely low temperatures including cryogenic-freezing temperatures.
ArChine Comptek FPC 150 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21 CFR 178.3570.
ATTRIBUTES
- Very high viscosity index for enhanced lubrication and superior protection at low temperatures
- Excellent film strength and anti-wear properties
- Outstanding cold-temperature fluidity
- Resists fling-off and remains on the chain for maximum lubrication and protection
- High stability and demulsibility in wet environments
- Excellent rust, corrosion and deposit resistance
- Non-toxic/non-hazardous
Applications
- Primarily recommended for rotary screw and vane air compressor
- Very effective in screw type compressors with oil injection cooling
- Units operating under severe conditions
- Multistage units with a history of excessive oil degradation from mineral oil-based products
- Compressor systems with critical gears and bearings
- Compressors used in stationary and mobile applications
- For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures
TYPICAL PROPERTIES*:
|
ISO Grade |
150 |
|
Appearance |
Light yellow, transparent liquid |
|
Density@20℃, g/cm3 |
0.849 |
|
Viscosity@40°C, mm2/s |
146.5 |
|
Viscosity@100°C, mm2/s |
18.28 |
|
Viscosity Index |
141 |
|
Flash Point, °C （open cup） |
254 |
|
Fire point, ℃ |
277 |
|
Pour Point, °C |
-45 |
|
Foaming, 24℃, |
10/0 |
|
Copper corrosion, 100°C/3hr, grade |
1 |
|
NSF Registration number |
149888 |
