24 - hour service hotline:15900706965

Products

Home > Products > ArChine Comptek FPC Series

ArChine Comptek FPC Series

ArChine Comptek FPC 46

Specification:19L、200L
Scope of application:
Introduction:Multistage units with a history of excessive oil degradation from mineral oil-based products

Introduction

ArChine Comptek FPC 68 

Food Grade Synthetic PAO Compressor Oil

 

GENERAL: 

ArChine Comptek FPC 68 is custom-blended with synthetic base fluids and special additives to provide excellent protection against 

wear and outstanding cold-temperature fluidity. They offer excellent performance in a wide range of temperatures including sub-zero temperatures. They also offer excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect 

components. In addition, they resist fling-off and is designed to remain on the chain for maximum lubrication and protection.

ArChine Comptek FPC 68 is long life lubricant and recommended for use in screw compressors, evaporators and spiral freezers operating

 at extremely low temperatures including cryogenic-freezing temperatures. 

ArChine Comptek FPC 68 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21 CFR

 178.3570.

ATTRIBUTES

  1. Very high viscosity index for enhanced lubrication and superior protection at low temperatures
  2. Excellent film strength and anti-wear properties
  3. Outstanding cold-temperature fluidity
  4. Resists fling-off and remains on the chain for maximum lubrication and protection
  5. High stability and demulsibility in wet environments
  6. Excellent rust, corrosion and deposit resistance
  7. Non-toxic/non-hazardous

Applications

  1. Primarily recommended for rotary screw and vane air compressor
  2. Very effective in screw type compressors with oil injection cooling
  3. Units operating under severe conditions
  4. Multistage units with a history of excessive oil degradation from mineral oil-based products
  5. Compressor systems with critical gears and bearings
  6. Compressors used in stationary and mobile applications
  7. For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures

TYPICAL PROPERTIES*:

ISO Grade

68

Appearance

Light yellow, transparent liquid

Density@20℃, g/cm3

0.843

Viscosity@40°C, mm2/s

66.2

Viscosity@100°C, mm2/s

9.87

Viscosity Index

132

Flash Point, °C (open cup)

250

Fire point, ℃

272

Pour Point, °C

-45

Foaming,24℃,

20/0

Copper corrosion, 100°C/3hr, grade

1

NSF Registration number

149886

 

 

*Typical data shall not be used as product specifications.