产品中心
- 舒泊润 Superlube
- SUPERLA PJ 2000
- Momentive氮化硼粉末
- Momentive氮化硼涂料
- 食品级硅脂
- 食品级轴承油
- 食品级真空泵油
- 食品级链条油
- 冷冻油
- 食品级冷冻油
- 螺杆式空压机油
- 丙烷冷冻油
- 美国BVA冷冻油
- 烷基苯冷冻油
- BVA空压机油
- BVA碳氢气体压缩机油
- BVA 烷基苯冷冻油
- BVA二氧化碳冷冻油
- 氨冷冻油
- BVA食品级齿轮油
- BVA食品级液压油
- R1234yf冷冻油
- 水溶性高温链条油
- R32冷冻油
- 高温链条油
- 氮化硼高温链条油
- 碳氢气体压缩机油
- 高温油膏
- 食品级硅油
- 食品级压缩机油
- 食品级齿轮油
- 食品级液压油
- 食品级白油
- 食品级润滑脂
- 食品级润滑油
- 合成齿轮油
- 食品级导热油
- 空压机油
- 食品级空压机油
- 合成空压机油
- 定制空压机油
- 活塞式空压机油
- 矿物型空压机油
- 食品级螺杆空压机油
- 食品级活塞空压机油
- 食品级合成空压机油
- UCON 基础油
- 食品级凡士林
- 轴承油
- 混合气体制冷剂压缩机冷冻油
- 真空泵油
- 亚群与陶氏对等表
- 涂层保护液
CP-4780-5
规格:5GAL、55GAL
产品简介:CP-4780-5 is used in convection and forced-cooled pipe cable systems.
同类产品:
Archine Refritech RAB 5
Click PDF at bottom left of the page to get more product details.
CP-4780-5
PRODUCT DESCRIPTION
CP-4780-5 is used in convection and forced-cooled pipe cable systems. It is also widely used in self-contained cable systems due to its high resistance to gassing under electrical stress. CP-4780-5 is based on synthetic alkyl benzene, which has the following advantages:
- Low power factor - High volume resistivity
-Excellent oxidation stability -Excellent resistance to gassing under -Non-toxic electrical stress
-High dielectric strength -Low weight loss under vacuum
-High water tolerance -No pumping problems
-Compatible with polybutene or mineral oil
-High auto ignition point -
TYPICAL PROPERTIES* |
CP-4780-5 |
Viscosity @ 40℃,cSt, ASTM D445 |
5.5 |
Viscosity @ 100℉ |
5.25 |
Flash Point, C.O.C.,℉(℃) ASTM D92 |
275(135) |
Pour Point ℉(℃) ASTM D97 |
-58(-50) |
Viscosity Index ASTM D2270 |
-33.0 |
Density, lb/gal, 60℉ |
7.24 |
Specific Gravity, ASTM D1298 |
0.87 |
ELECTRICAL PROPERTIES
Power factor, 60 Hz, 100°C D-924
Initial 0.0005
After heating 96 hrs. 115°C D-1934 (Procedure A) 0.0005
Resistively, ohm-cm, 100°C D-1169, D-257
Initial 1x1015
After heating 96 hrs. 115℃ D-1934 (Procedure A) 5x1014
Dielectric Strength, kV, 25℃ D-877 >35
Dielectric Constant, 60 HZ, 100℃ D-924 2.1
Gassing Under Electrical Stress
Pirelli, Microliters/Minute D-2300 (Procedure B) <-10
*These Values are not intended for use in preparing specifications.