产品中心
- 舒泊润 Superlube
- SUPERLA PJ 2000
- Momentive氮化硼粉末
- Momentive氮化硼涂料
- 食品级硅脂
- 食品级轴承油
- 食品级真空泵油
- 食品级链条油
- 冷冻油
- 食品级冷冻油
- 螺杆式空压机油
- 丙烷冷冻油
- 美国BVA冷冻油
- 烷基苯冷冻油
- BVA空压机油
- BVA碳氢气体压缩机油
- BVA 烷基苯冷冻油
- BVA二氧化碳冷冻油
- 氨冷冻油
- BVA食品级齿轮油
- BVA食品级液压油
- R1234yf冷冻油
- 水溶性高温链条油
- R32冷冻油
- 高温链条油
- 氮化硼高温链条油
- 碳氢气体压缩机油
- 高温油膏
- 食品级硅油
- 食品级压缩机油
- 食品级齿轮油
- 食品级液压油
- 食品级白油
- 食品级润滑脂
- 食品级润滑油
- 合成齿轮油
- 食品级导热油
- 空压机油
- 食品级空压机油
- 合成空压机油
- 定制空压机油
- 活塞式空压机油
- 矿物型空压机油
- 食品级螺杆空压机油
- 食品级活塞空压机油
- 食品级合成空压机油
- UCON 基础油
- 食品级凡士林
- 轴承油
- 混合气体制冷剂压缩机冷冻油
- 真空泵油
- 亚群与陶氏对等表
- 涂层保护液
Archine Hydratek FSH 100
规格:19L、200L
产品简介:USDA / NSF H1 Approved
ArChine Hydratek FSH 100
Food Grade Hydraulic Oil
NSF Registration No. 148513 Place of Origin: Shanghai,China
GENERAL:
ArChine Hydratek FSH 100 is specially formulated to provide superior lubrication in food plant machinery. The water white oil provides outstanding
anti-wear protection, which is compounded to prevent rusting in the presence of moisture, non-foaming and has rapid water separation
characteristics. An effective antioxidant gives long oil service life and reduces the possibility of sludge and varnish formation.
ArChine Hydratek FSH 100 should be used where hydraulic fluids and other mild lubricants are called for in equipment associated with food
processing. The oil provides anti-wear protection that meets all the requirements of major hydraulic pump manufacturers. USDA/NSF has
approvedArChine Hydratek FSH 100 under their H-1 specification for incidental contact with food. The oil complies with FDA guidelines
for food contact listed in CFR Title 21 Part 178, Section 178.3570.
FEATURES:
- USDA / NSF H1 Approved
- HALAL Approved
- Excellent Rust Protection
- Superior Oxidation Resistance
- Non-Foaming
- Superior Anti-Wear
Applications:
- Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended
- Hydraulic applications where contamination or leakage are unavoidable
- Where small amounts of water are unavoidable and this water could damage components
- Systems containing gears and bearings where mild anti-wear characteristics are required
- Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist
TYPICAL PROPERTIES*:
ISO Grade |
100 |
Apperance |
Colorless transparent liquid |
Density@ 20℃, g/cm3 |
0.862 |
Viscosity @ 40°C, mm2/s |
98.9 |
Viscosity @ 100°C, mm2/s |
11.61 |
Viscosity Index |
105 |
Pour Point, °C |
270 |
Flash Point, °C(open cup) |
―18 |
Foaming 24℃, 93.5℃, after24℃ |
10/0 20/0 10/0 |
Copper corrosion,100°C/3hr,grade |
1b |
*Typical data shall not be used as product specifications.