产品中心
- 舒泊润 Superlube
- SUPERLA PJ 2000
- Momentive氮化硼粉末
- Momentive氮化硼涂料
- 食品级硅脂
- 食品级轴承油
- 食品级真空泵油
- 食品级链条油
- 冷冻油
- 食品级冷冻油
- 螺杆式空压机油
- 丙烷冷冻油
- 美国BVA冷冻油
- 烷基苯冷冻油
- BVA空压机油
- BVA碳氢气体压缩机油
- BVA 烷基苯冷冻油
- BVA二氧化碳冷冻油
- 氨冷冻油
- BVA食品级齿轮油
- BVA食品级液压油
- R1234yf冷冻油
- 水溶性高温链条油
- R32冷冻油
- 高温链条油
- 氮化硼高温链条油
- 碳氢气体压缩机油
- 高温油膏
- 食品级硅油
- 食品级压缩机油
- 食品级齿轮油
- 食品级液压油
- 食品级白油
- 食品级润滑脂
- 食品级润滑油
- 合成齿轮油
- 食品级导热油
- 空压机油
- 食品级空压机油
- 合成空压机油
- 定制空压机油
- 活塞式空压机油
- 矿物型空压机油
- 食品级螺杆空压机油
- 食品级活塞空压机油
- 食品级合成空压机油
- UCON 基础油
- 食品级凡士林
- 轴承油
- 混合气体制冷剂压缩机冷冻油
- 真空泵油
- 亚群与陶氏对等表
- 涂层保护液
ArChine Comptek FSC 150
规格:19L、200L
产品简介:Multistage units with a history of excessive oil degradation from mineral oil-based products
ArChine Comptek FSC 150
Food Grade Compressor Oil
NSF Registration No. 148524 Place of Origin: Shanghai,China
GENERAL:
ArChine Comptek FSC 150 is custom-blended with white oil and special additives to provide excellent protection against wear and outstanding
cold-temperature fluidity. It also offers excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect
components. In addition, it resists fling-off and is designed to remain on the chain for maximum lubrication and protection.
ArChine Comptek FSC 150 is long life lubricant and recommended for use in screw compressors, evaporators and spiral freezers operating at
extremely low temperatures including cryogenic-freezing temperatures.
ArChine Comptek FSC 150 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21
CFR 178.3570.
ATTRIBUTES
- Excellent film strength and anti-wear properties
- Resists fling-off and remains on the chain for maximum lubrication and protection
- High stability and demulsibility in wet environments
- Excellent rust, corrosion and deposit resistance
- Non-toxic/non-hazardous
Applications
The following types of compressor applications have shown excellent performance with the ArChine Comptek FSC 150 oil:
- Primarily recommended for rotary screw and vane air compressor
- Very effective in screw type compressors with oil injection cooling
- Units operating under severe conditions
- Multistage units with a history of excessive oil degradation from mineral oil-based products
- Compressor systems with critical gears and bearings
- Compressors used in stationary and mobile applications
- For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures
TYPICAL PROPERTIES*:
ISO Grade |
150 |
Appearance |
Light yellow transparent liquid |
Density@ 20℃, g/cm3 |
0.865 |
Viscosity @ 40°C, mm2/s |
151.6 |
Viscosity @ 100°C, mm2/s |
15.26 |
Viscosity Index |
102 |
Pour Point, °C |
-15 |
Flash Point, °C(open cup) |
264 |
Fire Point, °C |
286 |
Foaming 24℃, |
35/0 |
Copper corrosion,100°C/3hr, grade |
1 |
*Typical data shall not be used as product specifications.