产品中心
- 舒泊润 Superlube
- SUPERLA PJ 2000
- Momentive氮化硼粉末
- Momentive氮化硼涂料
- 食品级硅脂
- 食品级轴承油
- 食品级真空泵油
- 食品级链条油
- 冷冻油
- 食品级冷冻油
- 螺杆式空压机油
- 丙烷冷冻油
- 美国BVA冷冻油
- 烷基苯冷冻油
- BVA空压机油
- BVA碳氢气体压缩机油
- BVA 烷基苯冷冻油
- BVA二氧化碳冷冻油
- 氨冷冻油
- BVA食品级齿轮油
- BVA食品级液压油
- R1234yf冷冻油
- 水溶性高温链条油
- R32冷冻油
- 高温链条油
- 氮化硼高温链条油
- 碳氢气体压缩机油
- 高温油膏
- 食品级硅油
- 食品级压缩机油
- 食品级齿轮油
- 食品级液压油
- 食品级白油
- 食品级润滑脂
- 食品级润滑油
- 合成齿轮油
- 食品级导热油
- 空压机油
- 食品级空压机油
- 合成空压机油
- 定制空压机油
- 活塞式空压机油
- 矿物型空压机油
- 食品级螺杆空压机油
- 食品级活塞空压机油
- 食品级合成空压机油
- UCON 基础油
- 食品级凡士林
- 轴承油
- 混合气体制冷剂压缩机冷冻油
- 真空泵油
- 亚群与陶氏对等表
- 涂层保护液
![](userfiles/4b86d0092786459881e57bae8e0e0ba6.jpg)
ArChine Refritech RNR 32
规格:20L、200L
产品简介:High oxidation resistance thanks to its natural suppressant content.
ArChine Refritech RNR 32
Naphthenic Oil for Freezer Compressors
Description
Group of naphthenic oils for freezer compressors which use freon, ammoniac or carbon dioxide. They also possess excellent
lubrication properties when used on industrial equipment.
Recommended uses
Similar to lubricant oils for all types of industrial equipment requiring oils with very low pour points. Basically compressors of
freezing equipment which use freon, ammoniac or CO2.
Qualities
Similar to lubricant oils for all types of industrial equipment requiring oils with very low freezing points.
Has a naturally low freezing point, without any additives.
High oxidation resistance thanks to its natural suppressant content.
High chemical stability.
Minimum carbon formation.
Low flocculation point.
Quality level
DIN 51503 KC
ISO 6743-3B-DRA
Technical characteristics
|
Unit |
Method |
Value |
Value |
Value |
Type |
|
|
32 |
46 |
68 |
Viscosity at 40℃ |
cSt |
ASTM D 445 |
32.0 |
46.0 |
68.0 |
Viscosity at 0℃ |
cSt |
ASTM D 445 |
510 |
900 |
1700 |
Viscosity at -15℃ |
cSt |
ASTM D 445 |
2750 |
5700 |
12000 |
Cloud point |
|
ASTM D 97 |
Does not appear |
Does not appear |
Does not appear |
Flash point |
℃ |
|
188 |
192 |
208 |
Pour point |
℃ |
ASTM D 97 |
-45 |
-40 |
-33 |
Copper Corrosion, 3h, 100℃ |
|
ASTM D130 |
1a |
1a |
1a |
Rust, method A |
|
ASTM D665 |
Pass |
Pass |
Pass |
Available in
185 Kg. Drums
Hazard identification
These products are not classified as toxic or hazardous according to current legislation.
Handling
Minimum safety precautions should be taken when using these products to avoid prolonged contact with the skin and in
accordance with good industrial hygiene practices. The use of gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks
Inhalation: As this product has low volatility, the risk of inhalation is minimal. Ingestion: Do not make an affected person vomit.
Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water. Eyes: Wash thoroughly with water.
General measures: Get medical help.
Fire-fighting measures
No special measures required. Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it
could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and
fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil
spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements.
*These values are not intended for use in preparing specifications.